Product < HomeProduct

Jaw Crusher

Jaw Crusher

Description

Jaw Crusher is ideally suitable for primary and secondary crushing. The largest compression resistance of the material to be crushed is 320MPa. The jaw crusher is widely used in stone mining, metallurgy industry, building material, highway, railway, and chemical industry.
Working Principle:
 The main structure of the jaw crusher consists of body frame,eccentric shaft,big pulley,flywheel,movable jaw,cheek plate,toggle plate,toggle seat,top thread bolt,reset spring,fixed jaw and movable jaw,the toggle plate has a great role in insurance.This jaw crusher uses motor as its power. Through the motors wheels, the eccentric shaft is driven by the triangle belt and slot wheel to make the movable jaw plate move by a regulated track. Therefore, the materials in the crushing cavity composed of fixed jaw plate, movable jaw plate and side-lee board can be crushed and discharged through the discharging opening.

Features

1.The deep crushing cavity increases the feeding capacity and output capacity;
2.High crushing ratio, homogeneous final product size;
3.Adjusting the discharge opening through gasket, more convenient、the adjusting range is wide, it can meet different customers' requirement;
4.Lubricate system is safe and reliable, easy to change the spare parts;
5.Simple structure, easy maintenance; consumption cost is lower;
6.Energy-saving; for one set of crusher saving about 15%-30% and more than twice for the whole crushing system;
7.Adjustment of the discharge port range, to meet the requirements of the different users.
8.Little noise and dust.

Technical Data

Model

Opening Size

(mm)

Max. Feeding Size

(mm)

Discharge Size

(mm)

Capacity

(t/h)

Power

(kw)

Dimension

(mm)
PE-250×400 400×250 200 20-50 5-20 15 1430×1310×1340
PE-400×600 600×400 350 40-100 15-60 30-37 1700×1732×1653
PE-500×750 500×750 425 50-100 40-110 45-55 2035×1921×2000
PE-600×900 900×600 480 65-160 90-180 55-75 2290×2206×2370
PE-750×1060 1060×750 630 80-140 110-320 90-110 2655×2302×3110
PE-900×1200 900×1200 750 95-165 220-450 110-132 3800×3166×3045
PE-200×1500 1200×1500 1020 150-300 400-800 160-220 3800×3166×3045
PEX-150×250 150×250 125 10-40 1-3 5.5 896×745×935
PEX-150×750 150×750 125 18-48 5-16 15 896×745×935
PEX-250×750 750×250 210 25-60 15-30 22-30 1667×1545×1020
PEX-50×1000 1000×250 210 25-60 15-50 30-37 1550×1964×1380
PEX-50×1200 1200×250 210 25-60 20-60 37-45 2192×1900×1950

Note:shunky machinery keeps the right of changes of design and specification; Any change shall not be advised additionally.



Articles about the Jaw Crusher